How can discarded paraglider fabric be given a meaningful second life?

Degree Project

Second Wind

Irma Ruiz Velasco Monroy
Liselotte Michelle Van Beveren

Second Wind investigates how discarded paraglider fabric can be upcycled to extend its lifecycle and maximise its material value. Through Material Driven Design, literature research, fieldwork, material experimentation, and public interventions, the project explored the material's properties, user experiences, and reuse potential. The research resulted in an open-source platform for knowledge sharing and a proof-of-concept wind turbine, demonstrating how accessible, low-energy upcycling can transform technical textile waste into valuable new applications.

This thesis project is a collaborative project in collaboration with Irma Ruiz.

Introduction

Second wind investigates discarded paraglider fabric as a technical textile within the broader context of textile waste and circular design. Technical textiles are often difficult to recycle due to their complex material compositions, protective coatings, and high-performance requirements. Paraglider fabric exemplifies this challenge: although retired wings no longer meet aviation safety standards, the material retains considerable functional value. Lightweight, durable, windproof, UV-resistant, and flexible, it embodies significant material and energy investments that are lost when the fabric is discarded.

Focusing on this small but growing waste stream, particularly relevant in South Tyrol where paragliding is widespread, the research addressed the question: How can discarded paraglider fabric be upcycled to extend its lifecycle and maximise its material value?

1/1

Methodologies

The project employed the Material Driven Design (MDD) methodology (Karana et al., 2015), supported by Meaning-Driven Materials Selection (Karana, 2009) and Nimkulrat’s Hands-on Intellect approach (Nimkulrat, 2007). Literature review, desk research, fieldwork, feedstock collection, material experimentation, prototyping, workshops, and public interventions were combined to investigate the material’s physical, sensory, structural, and interpretative qualities after its initial lifecycle.

1/1

Literature & Field Work

The methodologies were supported by literature and fieldwork. Key sources included research on microplastic release from synthetic textiles (De Falco), which highlighted the importance of limiting the material to temporary outdoor applications; the Convivial Toolbox (Sanders & Stappers), which informed our intervention methods; Materials and the Environment (Ashby), which introduced embodied energy as a guiding principle for distinguishing upcycling from downcycling; and The 9 Dimensions (Vervoort et al.), which provided a framework for evaluating societal impact through creative practice.

The fieldwork complemented this research through participation in the Touching Toxic Textiles workshop at FFF, a visit to paraglider fabric expert Elena Kostner, and a paragliding experience as embodied research while strengthening engagement with the paragliding community.

1/4
2/4
3/4
4/4

Experimentation

Experimentation was a central part of this thesis and reflects both the Material Driven Design (MDD) methodology and hands-on intellect principles.

As upcycling is a key focus, accessibility guided the experimentation phase. The goal was to use tools & methods that can be used in makerspaces and community workshops, rather than relying on specialised industrial equipment.

Each experiment was documented in comparative tables to identify effective techniques for working with the material. The research explored both permanent and reversible processes, with the latter allowing the material to be returned to its original state for future reuse. Monomaterial approaches were also evaluated for their sustainability. Energy use was an additional key factor, with lower-energy processes prioritised to account for the material’s embodied energy.

1/8
2/8
3/8
4/8
5/8
6/8
7/8
8/8
1/3
2/3
3/3

One of the many evaluation tables. All of them can be found on the open-source website.

Interventions

Several interventions were organised throughout this thesis. These interventions served as testing grounds for gathering valuable insights in line with the MDD methodology, while simultaneously raising awareness about upcycling and the potential of discarded paraglider fabric.

Streets for Kids

The first intervention took place during Streets for Kids, an event where a street is temporarily closed to traffic and turned into a public space for children. Second Wind contributed by installing a canopy made from a discarded paraglider and hosting an upcycling workshop for children, where paraglider lines were used to create keychains. This event served as a first testing ground.

1/5
2/5
3/5
4/5
5/5

Fashion For Future

The second intervention focused on collecting user experiences with the material (MDD Step 1). Insights were analysed using a mind map and the Meanings of Materials Model (Karana, 2009). This informed an experience vision that reactivates paraglider fabric through outdoor, wind-driven applications that respect its lightweight, durable, and energy-intensive qualities. 

1/5
2/5
3/5
4/5
5/5

Upcon

The third intervention tested this experience vision (MDD Step 3) by creating windsocks from paraglider fabric. Survey results showed that participants naturally associated the material with outdoor use, and responded with curiosity to wind-based applications, despite some concerns about reliability and variability.

1/6
2/6
3/6
4/6
5/6
6/6

Insights

Across all three interventions, the work evolved from open exploration to structured validation. Paraglider fabric is consistently perceived as lightweight, strong, and valuable, but also unfamiliar and technically complex. Outdoor and wind-related applications emerged as the most intuitive reuse direction, with wind seen as both an opportunity and a limitation.

Design Paths

These findings informed two complementary design outcomes: an open-source platform for awareness raising and skill sharing on how to re-use, and a proof-of-concept wind turbine that reactivated the material within a renewable energy application. Together, these outcomes demonstrate how positive upcycling can preserve material value, extend product lifecycles, and foster community engagement. The thesis contributes to discussions on technical textile reuse, circular design, and eco-social agency by repositioning discarded paraglider fabric as a valuable resource rather than a waste material.

Opens-source

A compilation of the most relevant learnings, techniques, and approaches drawn from research and hands-on experimentation — is intended as an accessible reference for anyone seeking to work with paraglider fabric. From the outset, two values shaped the direction of this project: skill sharing and awareness. By making this knowledge freely available, the aim extends beyond mere accessibility; it is also an invitation to reconsider how we perceive material waste and the concept of a second life

1/3
2/3
3/3

Wind Turbine

The wind turbine uses blades made from discarded paraglider fabric, reflecting the material experience vision by giving the material a role that aligns with its original purpose: wings continue to work with wind.

When exposed to wind, the turbine rotates and generates enough electricity to power an LED. As a proof of concept, it shows that some of the energy invested in upcycling can be recovered through use. By building on the material's existing qualities and embodied energy, the artefact demonstrates a more sustainable and meaningful approach to upcycling.

1/3
2/3
3/3

Conclusion

The research suggests that the material retains the highest value in outdoor and wind-related applications, where its lightweight, durable, windproof, and UV-resistant properties can be fully utilised. The proof-of-concept wind turbine demonstrates one possible application within this context, although the findings do not point towards a single ideal product. Rather, they reveal a broad range of potential directions that can successfully extend the material's lifecycle.

Several design considerations emerged as particularly important. The use of low-energy production methods, accessible tools such as sewing machines, and mono-material design strategies can reduce environmental impact while supporting future recyclability. When these principles are combined with knowledge sharing and community engagement, discarded paraglider fabric can be transformed from a waste material into a valuable resource for sustainable design.

Future Outlook

The next steps focus on further material testing, developing the open-source platform, and improving the wind turbine and outdoor product concepts. Collaborations with partners, makerspaces, and the paragliding community will support knowledge sharing, product development, and reuse initiatives. Establishing a reliable supply of discarded paragliders through inspection centres is also essential to ensure a consistent material flow and gain valuable insights into material properties for future applications.

References

Ashby, M.F. (2013) Materials and the environment: Eco-informed material choice. 2nd edn. Oxford: Butterworth-Heinemann.


Karana, E. (2009) Meanings of materials. PhD thesis. Delft University of Technology.


Karana, E., Barati, B., Rognoli, V. and Zeeuw van der Laan, A. (2015) ‘Material driven design (MDD): A method to design for material experiences’, International Journal of Design, 9(2).


Karana, E., Bossuyt, W. and Kesteren, I. van (eds.) (2014) Materials experience: Fundamentals of materials and design. Oxford: Butterworth-Heinemann.


Nimkulrat, N. (2007) Hands-on intellect: Integrating craft practice into design research. Helsinki: University of Art and Design Helsinki.


Sanders, E.B.-N. and Stappers, P.J. (2012) Convivial toolbox: Generative research for the front end of design. Amsterdam: BIS Publishers.

A project made in the course

Master in Eco Social Design Laurea / Abschluss 26.2

Graduation projects from the Master in Eco-Social Design.
More projects by Irma Ruiz Velasco Monroy, Liselotte Michelle Van Beveren